Amada Vipros king with tower & scrap conveyer

[Flexpart]

Hi, I have a question, I got the Vipros King machine produced 1999. To that machine I tower with automatic metal sheet conveyer. The PLC to the tower is Simatic S300 and Operational Panel OP17. To get the access to all parameters in OP17 I need to input the password, but there's nothing in the technical documentation. Do you know what type of password Amada use as standard one? Some details you have in attachement
BR Renata

 

[jetrep]

I did not look at attached document but I know they sometimes used 'amada' spelled backwards: adama