Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ALUMINUM SOFT JAWS

Status
Not open for further replies.
CNCMADNESS

CNCMADNESS

Mechanical
Jun 27, 2002
4
In my search for inexpensive soft jaws such as snap jaws, I found a set for thirty bucks and I can use both sides. I found them at If any knows of any that are cheaper please respond with info.
 
Status
Not open for further replies.

Similar threads

NOURIALI
  • Locked
  • Question
aluminum brazing scanning tools
Replies
2
Views
873
mfgenggear
mfgenggear
rQuestionEngineering
  • Locked
  • Question
Soft foot on stacked machine pedestal 1
Replies
3
Views
369
Tmoose
Tmoose
caddone
  • Locked
  • Question
Lazer cutting hand holes/access on aluminum pipe / Tube
Replies
1
Views
267
dvd
dvd
Claypoolsbass
  • Locked
  • Question
Press fit a steel pin into aluminum
Replies
3
Views
1K
John Donlan
John Donlan
danthedesigner
  • Locked
  • Question
Thinnest Wall on Aluminum Boss for Micro Screw
Replies
5
Views
534
danthedesigner
danthedesigner

Part and Inventory Search

Sponsor

Back
Top Bottom