Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Aluminum 359,Transition Temp and Damage Evolution ?

Status
Not open for further replies.
yassou

yassou

Mechanical
Joined
Mar 13, 2015
Messages
69
Location
FR
Hi everybody
One of my parts in simulation is Aluminum 359 and i define Johnson-Cook damage for it, but i can't find the "Transition Temperature" and "Damage evolution" for this material.
I will be appreciated, If anyone knows how can i get this parameters.
With Best Regards.
yassou.
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
viscoelastic behavior + Damage
Replies
8
Views
12K
snow83
S
vikram manoj
  • Question Question
How to reduce fiber damage
Replies
2
Views
8K
Compositepro
Compositepro
jball1
  • Locked
  • Question Question
Connector Damage/Failure
Replies
6
Views
1K
jball1
jball1
DavidMcArthur
  • Locked
  • Question Question
ABAQUS Explicit Damage
Replies
2
Views
1K
DavidMcArthur
DavidMcArthur
S
  • Question Question
EQUATIONS TO FIND YOUNGS MODULUS,CONCRETE DAMAGE PLASTICITY PARAMETERS FOR STEEL FIBRE REINFORCED CONCRETE
Replies
4
Views
8K
Shreyas M
S

Part and Inventory Search

Sponsor

Back
Top