Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

alternative for currently using 59c11 eeprom

Status
Not open for further replies.

suman

Structural
Joined
Jan 29, 2000
Messages
1
Location
IN

sir we r using a control board with d7810hg 64 pin (it is an ADC supposedly).also we have a programmed otprom with a supporting eeprom which is 59c11 (8-pin dip).now this eeprom is very hard to find.some guys advised me to go for 93c46 (also 8-pin dip eeprom).both r 1Kb serial micro wire eeprom.but one pin in 93c46 is dummy which is a ready/busy signal pin in 59c11.how do i replace it? can i modify the otprom program to suit it.infact the ready/busy pin 93c46 is integrated with data out pin .whreas in 59c11 both r different.besides which every thing else is the same.
please help me out.
if some body can tell me where i can get 59c11 eeprom i will be very grateful. * the eeprom is not programmed.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top