Indicator1
Structural
To all:
When working above the "knee", what value of recoil permeability do I use: 2.5, please?
Thank you.
When working above the "knee", what value of recoil permeability do I use: 2.5, please?
Thank you.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Alnico 5 sintered recoil permeability 1
- Thread starter Indicator1
- Start date
- Status
- Status
Similar threads