Alloy Steel Plating Test Panels 2

[QAFitz]

Looking for a source of 1" x 4" x .063" Thick alloy steel test panels with a Nickel of 1.5 - 2.2 or close to that. Any sources? These will be used to verify plating thickness and adhesion of electroless nickel on E4340 material.

Thanks in advance.

 

[TVP]

Fitz,

ACT is the usual supplier for test panels. Their standard panels are not alloy steel, nor are they as thick as .063", but they do make specials upon request. I would contact them for a quote:

http://www.acttestpanels.com/default.aspx?topid=9&sectionid=1