Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Allowance and Tolerances for Fits

Status
Not open for further replies.
reyemka

reyemka

Mechanical
Joined
Nov 4, 2009
Messages
19
Location
CA
I'm looking for some guidelines similar to the Machinery's Handbook Allowance and Tolerances for Fits, but for plastics?
 
Sort by date Sort by votes
<chuckle> Boooo, hissssss....

Dan - Owner
Footwell%20Animation%20Tiny.gif
 
Upvote 0 Downvote
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

PatAero
  • Locked
  • Question Question
Barbed press fits, allowable stress vs required
Replies
0
Views
861
PatAero
PatAero
MechMatengineer
  • Locked
  • Question Question
Quality control for plastic piping
Replies
1
Views
3K
Pud
Pud
enginesrus
  • Locked
  • Question Question
Adhesive for Polyethylene to Stainless steel
Replies
2
Views
3K
TugboatEng
TugboatEng
Buckshott00
  • Locked
  • Question Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
956
Buckshott00
Buckshott00
Thanh_fromVietnam
  • Locked
  • Question Question
Best plastic material/ grade for Plastic Pallet
Replies
2
Views
1K
dgallup
dgallup

Part and Inventory Search

Sponsor

Back
Top