Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Allowable seal leakage

Status
Not open for further replies.
boo1

boo1

Mechanical
Joined
Oct 31, 2001
Messages
2,129
Location
US
I need help determining how much should be allowable seal leakage.

Seal oil to ambient
Oil Mil-PRF-23699 (5mm**2/s synthetic ester base stock) Kinematic Viscosity @100 deg C =5.17, @ 40 deg C=25.26
Pressure 1800 psi
Seal Viton A, OD 5.395", ID 5.14"
Speed 1285 RPM
Balanced condition
 
Sort by date Sort by votes
I hope you posted this in the pump forum, in which case you can delete this one here.

OMG%20something%20else.png
 
Upvote 0 Downvote
I will move it
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Suradach
  • Question Question
Technical Opinion on SS304 Potable Water Line Leakage
Replies
11
Views
15K
EdStainless
EdStainless
R
  • Question Question
allowable stress value in creep region for 1.0345
2
Replies
21
Views
18K
rafaresma
R
PIPING_DESIGNER
  • Locked
  • Question Question
FRP/ GRE Flange Leakage Check
Replies
1
Views
3K
GBTorpenhow
GBTorpenhow
R
  • Locked
  • Question Question
Air assisted seal pressure vessel
Replies
3
Views
4K
btrueblood
btrueblood
C
  • Question Question
How to Air-Seal Oval Tube into Hole!
Replies
5
Views
783
chuwiEngineer
C

Part and Inventory Search

Sponsor

Back
Top