reebelec
Industrial
- Sep 28, 2001
- 18
We have 40F with a bad power supply board, it is a dc-dc ps
part number c-8730-1661-1
I am looking for some info on what a replacement board is worth, or possibly what the output current is for the +5V and +24V supplies and what I should be looking for from the PF output. Most of the components were blown so I cannot read part numbers. Doing some tracing I know IC1 is the 5 volt regulator and made by Sanken (current output?). The PF comes from pin 1 of IC2 (tops gone so I don't know the make or model, but I think it is a comparator.
Thanks in advance for any info.
part number c-8730-1661-1
I am looking for some info on what a replacement board is worth, or possibly what the output current is for the +5V and +24V supplies and what I should be looking for from the PF output. Most of the components were blown so I cannot read part numbers. Doing some tracing I know IC1 is the 5 volt regulator and made by Sanken (current output?). The PF comes from pin 1 of IC2 (tops gone so I don't know the make or model, but I think it is a comparator.
Thanks in advance for any info.