Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
air screw driver symbol for pneumatic schematic??
- Thread starter dtwo
- Start date
eromlignod
Mechanical
- Jul 28, 2006
- 402
Wouldn't it just be the symbol for an airmotor? The standard symbol is a circle with an inward-pointing triangle where the air line comes in. The fact that it's a screwdriver seems immaterial as far as the pneumatic plan is concerned.
Don
Kansas City
Don
Kansas City
I think it would be a combined symbol - various components inside a dash-dot line box to indicate a device.
The likely components would include an air motor, manually actuated valve for trigger, manual 3-way valve for forward/reverse, possibly a filter, regulator, etc.
The likely components would include an air motor, manually actuated valve for trigger, manual 3-way valve for forward/reverse, possibly a filter, regulator, etc.
- Status
Similar threads
- Question
- Question