I have a Kollmorgen U12M4HT servo disc motor that I want to operate at a power output that requires forced air cooling. The power curves that I have indicate that I need two pounds per minute. Does anyone know how this air is to be directed? Does it have to be blown through the motor, across the ends, against the sides, or what? I have had no luck getting this information from Kollmorgen.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
air cooling Kollmorgen Servo Disc motors
- Thread starter srgnt
- Start date
jbartos
Electrical
- Jan 15, 2000
- 6,440
Suggestion: Visit
for Spike Proof motors
for Spike Proof motors
It should be defined in their manual??? Did you try their website for info?
Grean Eggs & Ham - Keep calling them...tell them your going to return it if they don't help, that might work.
Take a look at my Direct Drives?
Cameron Anderson
Sales & Applications Engineer
"Dedicated to the Science of Motion"
Grean Eggs & Ham - Keep calling them...tell them your going to return it if they don't help, that might work.
Take a look at my Direct Drives?
Cameron Anderson
Sales & Applications Engineer
"Dedicated to the Science of Motion"
- Status
Similar threads
- Question