Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AIFR panel laying method

Status
Not open for further replies.
Vicky07

Vicky07

Mechanical
Joined
Sep 2, 2017
Messages
14
Location
IN
Hi all.
Till date I have seen laying of AIFR panels with the support of temporary wooden frames between the girders. Is there any other means of laying the deck panels such as unrolling it fully throughout the girder length and stiffening / pulling the ends with some special machines?
Kindly share your experience and ideas.

Thanks
 
Status
Not open for further replies.

Similar threads

KVARM
  • Locked
  • Question Question
Welding and Leak Testing of Aluminum Honeycomb Panels
Replies
1
Views
455
BEMPE16524
BEMPE16524
KVARM
  • Locked
  • Question Question
Pigging Operation in Tanks with AIFR
Replies
4
Views
580
HTURKAK
HTURKAK
KVARM
  • Locked
  • Question Question
Stain on Aluminium Panel
Replies
0
Views
132
KVARM
KVARM
Jay_
  • Locked
  • Question Question
Tank chime sealing - Practical method
Replies
1
Views
1K
HTURKAK
HTURKAK
MA69
  • Locked
  • Question Question
Hi Anybody give standard method sta
Replies
2
Views
235
Andrew ONeill
Andrew ONeill

Part and Inventory Search

Sponsor

Back
Top