afx do not work

[khalid pervez]

hi every one
I am using creo 2.0 F000. when I installed creo 2.0 first
time & enabled afx, it did work. due to some reason I had
to re install it & since then despite setting the option to
enabled (i.e. yes)it is not working.can anyone comment?
what has gone wrong?

thanks in anticipation

 

[tomicjr]

Before troubleshooting further, try uninstalling Creo 2.0 F000 and re-install Creo 2.0 F001 (Be sure to check Advanced Framework Extension under Application Features tab in Installation Assistant).


There were some issues discovered with F000 related to uninstall and license reconfiguration. Refer to this Case Solution for uninstall instructions:


https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS58765


For those with config.pro files from earlier releases, the option has been changed from efx_enabled to afx_enabled.

 

[khalid pervez]

Thx tomicjr
I m now using Creo 2.0 M010 and afx/efx is working.