Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adjust the range

Status
Not open for further replies.
Catia8543

Catia8543

Mechanical
Joined
Jul 12, 2005
Messages
13
Location
US
Using V5r13, range is currently set at 1 x 10 to the fifth. I need a setting of 1 x 10 to the sixth. I have a part w/ a r100,000 but I need to increase this to a radius of 1 million.

Many thanks!
 
Status
Not open for further replies.

Similar threads

Sidtha
Get the required proprties from the property window from the bundle segment in catia v5 using vba
Replies
3
Views
6K
crshears
crshears
A
  • Question Question
Does BOM have links to which drawings are using the parts in it?
Replies
0
Views
6K
aerostudent2618
A
Med Che
  • Question Question
How to get the link of a 2D Component Instance from a Drawing Catalog in CATIA VBA?
Replies
3
Views
5K
Little Cthulhu
Little Cthulhu
xPAIVAx
  • Locked
  • Question Question
Parameters on the inserting windows tab parameters
Replies
0
Views
790
xPAIVAx
xPAIVAx
A
  • Question Question
Help for Macros that "scanns" the CATdrawing sheet to get Part Number and Drawing sheet no.
Replies
3
Views
14K
Little Cthulhu
Little Cthulhu

Part and Inventory Search

Sponsor

Back
Top