Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adhesive

Status
Not open for further replies.
yuren27

yuren27

Automotive
Joined
Jul 28, 2001
Messages
2
Location
US
If i need to glue Carbon with HNBR Hydrogenated nitrile butadine rubber what kind of glue i need to use to support more then 60 psi of pressure?. Any suggestion?
 
Sort by date Sort by votes
My first suggestion would be a moisture cure urethane. This will stand an excessive amount of stress. All of the major manufactures have their own brand, and most are approved for the auto industry.


I hope that I've helped,
John
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Question Question
Seeking Guidance on Developing an Adhesive Coating Formula
Replies
5
Views
4K
btrueblood
btrueblood
Stopblock
  • Locked
  • Question Question
Need Help Finding Adhesive
Replies
1
Views
1K
dik
dik
J.Platt
  • Locked
  • Question Question
Adhesive for grit on a stainless roller
Replies
2
Views
1K
Compositepro
Compositepro
K.P.M.
  • Locked
  • Question Question
Adhesive for Cryogenic application
Replies
1
Views
1K
MintJulep
M
EIJPN
  • Locked
  • Question Question
Low viscosity adhesive for graphite
Replies
1
Views
948
btrueblood
btrueblood

Part and Inventory Search

Sponsor

Back
Top