Adhesive compatible with hydrazine

[kevlar49]

Does anyone know of an adhesive that is compatible with hydrazine?

 

[patprimmer]

Have you tried 3M technical support?

Regards
Pat
See FAQ731-376 for tips on use of eng-tips by professional engineers &

http://eng-tips.com/market.cfm

for site rules

 

[btrueblood]

Well...what temperature, what exposure amount, and duration?

I assume you've looked at Eckhardt Schmidt's book. And here

http://www.dtic.mil/cgi-bin/GetTRDoc?AD=AD0632287

Some epoxies may be okay for short term, room temp. or so - usually amine-cured epoxies do better than novolac resins. Short chain polyethylene might work, if you want a hot-melt, also at low temps.

This reference talks about an epoxy sealant modified to improve flexibility but maintain hydrazine resistance:

http://namis.alionscience.com/conf/tscc/search/pdf/B116470.pdf