Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adding parts in Abaqus (in 2d)

Status
Not open for further replies.
optimus2007

optimus2007

Mechanical
Joined
Sep 3, 2008
Messages
29
Location
DE
I want to add an rigid part (plate) to a solid one (cylinder).
How can I connect them?

thanx in advance
 
Sort by date Sort by votes
Hi, I am not sure but would you follow
assembly-constraint-merge/cut
see whether it's useful?

Or a tie interaction will be the alternative method probably.

Ju

 
Upvote 0 Downvote
Or if you want to make it one single part, use the Shape toolbar in the part module to create the objects.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
A
  • Solved
Applying Local Coordinate System for BC in Abaqus
Replies
1
Views
3K
FEA way
FEA way
jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
754
FEA way
FEA way
mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
401
mj345
mj345
Shahrukh_Islam
  • Question Question
What does Convergence Tolerances mean in Abaqus?
Replies
1
Views
9K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top