Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adding a column to a table

Status
Not open for further replies.
Mirrorman44

Mirrorman44

Automotive
Nov 11, 2008
16
We just updated from NX3 to NX5. still learning where they
moved everything. Have some existing tables that I need to
add column to but, can seem to find away to do it.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Highlight the column adjacent to where you want the new one, RMB -> Insert -> Column...

"Good to know you got shoes to wear when you find the floor." - [small]Robert Hunter[/small]
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Werner K
  • Locked
  • Question
Pull expression values into a component when adding to an assembly
Replies
5
Views
628
Werner K
Werner K
NXsupport
  • Question
Is there a quick way to dynamically move a datum place across a body to measure minimum wall thickness
Replies
3
Views
5K
Toost
Toost
CAD2015
  • Question
Converting a PDF document to CGM file in NX....................... 1
Replies
2
Views
2K
CAD2015
CAD2015
BCE75
  • Locked
  • Question
Does NX have a way to display layout guides in addition to the grid on a drawing sheet?
Replies
2
Views
1K
BCE75
BCE75
John-FR
  • Locked
  • Question
Question: How to make a vector based PDF
Replies
1
Views
1K
cowski
cowski

Part and Inventory Search

Sponsor

Back
Top Bottom