Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ADAPTIVE Meshing

Status
Not open for further replies.
Cansand

Cansand

Structural
Joined
Jan 14, 2007
Messages
102
Location
CA
I am using NLGEO and some elements seem to be distorted (Jackobian=0 or negative)due to exccessive deformation . Do you recommend me to use adaptive meshing
 
Status
Not open for further replies.

Similar threads

polak7
  • Locked
  • Question Question
Steel rolling process with large deformation - implementing ALE adaptive meshing
Replies
3
Views
2K
FEA way
FEA way
B
  • Question Question
Adaptive Meshing with Custom Phase‑Field UEL in Abaqus – Feasible or Challenging?
Replies
1
Views
3K
FEA way
FEA way
B
  • Locked
  • Question Question
Adaptive remeshing and Swept ? Structured meshes?
Replies
2
Views
2K
Vishakh_Rajendran
Vishakh_Rajendran
A
  • Locked
nanocomposite meshing
Replies
6
Views
2K
Austine316
A
S
  • Locked
  • Question Question
Stent Meshing using Tet Elements
Replies
4
Views
1K
IceBreakerSours
IceBreakerSours

Part and Inventory Search

Sponsor

Back
Top