Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
adams flex 1
- Thread starter mjzahedii
- Start date
-
1
- #2
GregLocock
Automotive
I doubt it. A flex model is a reduced subset of the stiffness matrix. As suc there is no real structure inside it.
What you could do is export the displacement or force time histories and apply them to your original FEA model.
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
What you could do is export the displacement or force time histories and apply them to your original FEA model.
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
The Adams/Durability plug-in can compute the strains and stresses by combining the modal coordinates' time-histories and the modal stress shapes. Third-party durability codes can perform the same computation too.
Riccardo Testi
---
Development and Strategies
2 Wheeler Engines Technical Centre
Piaggio & C. S.p.A
Viale Rinaldo Piaggio, 25
56025 Pontedera (Pisa) - ITALY
Phone: +39 0587 272850
Fax: +39 0587 272010
Mobile: +39 339 7241918
E-mail: riccardo.testi@piaggio.com
Riccardo Testi
---
Development and Strategies
2 Wheeler Engines Technical Centre
Piaggio & C. S.p.A
Viale Rinaldo Piaggio, 25
56025 Pontedera (Pisa) - ITALY
Phone: +39 0587 272850
Fax: +39 0587 272010
Mobile: +39 339 7241918
E-mail: riccardo.testi@piaggio.com
- Status
Similar threads
- Question