Mgrelect5384
Electrical
I want to connect 02 Spare ACS800-07-0255 Drives in Master Slave configuration for testing. Motors are coupled to same gearbox. Can any body share manual and drawing to carry out this activity. Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ACS800 Master Slave Configuration
- Thread starter Mgrelect5384
- Start date
- Status
Tanweer Ahmed
Electrical
I have severally implemented such application where two motors and VFDs are driving a single load. The challenge is to have equal load sharing by both the drives and this is not easy to achieve and no manual explains this how to do.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question