Jun 26, 2008 #2 MartinBellehumeur Industrial May 21, 2008 40 I'm not sure if it's available in the hole command (I'm assuming you've already looked), but I would suppose one way of doing it would be to use the Worm Gear Designer... or a helical cutout with a 29 degree slope, patterned in a circle. Hope this helps, Martin Upvote 0 Downvote
I'm not sure if it's available in the hole command (I'm assuming you've already looked), but I would suppose one way of doing it would be to use the Worm Gear Designer... or a helical cutout with a 29 degree slope, patterned in a circle. Hope this helps, Martin
Jun 27, 2008 #3 beachcomber Mechanical Jan 19, 2005 1,488 You can add the thread details to the Holes.txt file, then you will be able to select it as for other threads bc. 2.4GHz Core2 Quad, 4GB RAM, Quadro FX4600. Upvote 0 Downvote
You can add the thread details to the Holes.txt file, then you will be able to select it as for other threads bc. 2.4GHz Core2 Quad, 4GB RAM, Quadro FX4600.
