Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ACI Codes

Status
Not open for further replies.
twilda

twilda

Structural
Joined
Sep 7, 2010
Messages
3
Location
US
Is there a specific ACI code that should be used when designing concrete weirs and concrete water storage tanks?
 
Sort by date Sort by votes
Your best bet is to look at the ACI website. There are several committees that deal with water tanks and environmental strucutres ACI 350, 371, and 373 for starters.
 
Upvote 0 Downvote
Is there somewhere in writing that states the plastic cone holes left after a wall-tie is removed are to be patched?
 
Upvote 0 Downvote
That's a detail the code doesn't trifle with.
However, it should be mentioned in the specifications.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jochav52802
  • Question Question
Okay to use headed anchor tension reinforcement per ACI 318-19?
Replies
1
Views
6K
HTURKAK
HTURKAK
mjhaveri
  • Locked
  • Question Question
ACI 318-19 Shear reinforcement design for Piles
Replies
0
Views
2K
mjhaveri
mjhaveri
dstruct99
  • Locked
  • Question Question
ACI 318-19 Special shear wall Design with non uniform shape
Replies
4
Views
2K
dstruct99
dstruct99
lexpatrie
  • Locked
  • Question Question
Unit weight of Raw Sewage (ACI 350)
Replies
5
Views
2K
lexpatrie
lexpatrie
mgoodenough
  • Locked
  • Question Question
Stacking or "Piggybacking" of headed shear studs ACI 318-19 R22.6.6.2
Replies
2
Views
1K
GC_Hopi
GC_Hopi

Part and Inventory Search

Sponsor

Back
Top