Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ACI 530
- Thread starter melsawaf
- Start date
It can be found very easily here:
Latest version is 2013.
Check out Eng-Tips Forum's Policies here:
faq731-376
Latest version is 2013.
Check out Eng-Tips Forum's Policies here:
faq731-376
JedClampett
Structural
If you don't mind paying, JAE has good advice.
If you want a free copy, go to the local engineering library or borrow one from a buddy. ACI isn't real good at making their codes available for free.
If you want a free copy, go to the local engineering library or borrow one from a buddy. ACI isn't real good at making their codes available for free.
concretemasonry
Structural
The ACI 530 document is used domestically and internationally.
It is written the the Masonry Joints Standards Committee (MSJC) that is comprised of the The Masonry Society (TMS), The American Concrete Institute (ACI), the SEI/ASCE along with
It is printed and distributed by ACI because they are heavy into that area and the other organizations were not interested in doing that.
If you are a member (reasonable cost), you get a substadiscount on all ACI documents. - Not quite as good as ASTM, where there are individual memberships that entitles the member to one volume.
Dick
Engineer and international traveler interested in construction techniques, problems and proper design.
It is written the the Masonry Joints Standards Committee (MSJC) that is comprised of the The Masonry Society (TMS), The American Concrete Institute (ACI), the SEI/ASCE along with
It is printed and distributed by ACI because they are heavy into that area and the other organizations were not interested in doing that.
If you are a member (reasonable cost), you get a substadiscount on all ACI documents. - Not quite as good as ASTM, where there are individual memberships that entitles the member to one volume.
Dick
Engineer and international traveler interested in construction techniques, problems and proper design.
- Thread starter
- #5
- Status
Similar threads
- Question
- Locked
- Question