Jan 15, 2002 #1 axel Mechanical Joined Jan 15, 2002 Messages 3 Location IT I am interested in constructing an accelerometer and related equipment ( or assemeble from existing parts). - Accelerometer - Signal conditioner. Any suggestion is highly appreciated.
I am interested in constructing an accelerometer and related equipment ( or assemeble from existing parts). - Accelerometer - Signal conditioner. Any suggestion is highly appreciated.
Jan 18, 2002 #2 Rich2001 Mechanical Joined Mar 23, 2001 Messages 896 Location US Take a lot at this site http://ccrma-http://www.stanford.edu/CCRMA/Courses/252/sensors/node9.htmlit discusses the Analog Devices ADXL50 Accelerometer If i had to build on from scratch I would use the mass and spring technique. Upvote 0 Downvote
Take a lot at this site http://ccrma-http://www.stanford.edu/CCRMA/Courses/252/sensors/node9.htmlit discusses the Analog Devices ADXL50 Accelerometer If i had to build on from scratch I would use the mass and spring technique.
Jan 22, 2002 Thread starter #3 axel Mechanical Joined Jan 15, 2002 Messages 3 Location IT An ADXL50 or ADXL150 could be okay does any one has an experince to share on interfacing these accelerometers with a PC and some programs. Upvote 0 Downvote
An ADXL50 or ADXL150 could be okay does any one has an experince to share on interfacing these accelerometers with a PC and some programs.
Feb 11, 2002 #4 cesarm Electrical Joined Dec 6, 2001 Messages 20 Location VE You should visit the Analog Devices website and look at aplications notes. Cesarm Upvote 0 Downvote