Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Acceleration data comparison between AAR and actual service data

Status
Not open for further replies.
paulpatrick

paulpatrick

Mechanical
Joined
Aug 27, 2005
Messages
49
Location
GB
Hi
I have an official data set from AAR which has all positive Max and Min Accelerations with the number of occurances that each set occurs,
however the data I have to compare with is a combination of Positive and negative Max and Min accelerations and its occurances.
How do convert both sets of data such that I dont lose too much in the datas manipulation?



Any help would be great.
Thanks
P



 
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question Question
Time Domain Test Data Interpretation in Frequency Domain!
Replies
3
Views
1K
electricpete
electricpete
bsrd
  • Locked
  • Question Question
STC rating between apartment units.
Replies
3
Views
1K
Heaviside1925
Heaviside1925
I
  • Locked
  • Question Question
Fan vibration and its effect on fasteners
Replies
5
Views
3K
dgeesaman
dgeesaman
M
  • Locked
  • Question Question
Detecting and Analyzing Noise in an Actuator
Replies
1
Views
2K
GregLocock
GregLocock
struclearner
  • Locked
  • Question Question
Book to Understand PSD and FFT for Time Domain Data to Frequency Domain Conversion!
Replies
2
Views
510
electricpete
electricpete

Part and Inventory Search

Sponsor

Back
Top