Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
AC Ratings
- Thread starter 140668
- Start date
Blackcountryman
Electrical
They are definitions according to IEC 158-1 for contactor utilisation
AC1 is all types of ac load with a power factor not less than 0.95
AC3 applies to squirell cage motors with breaking during normal running. On starting the contactor makes the starting current which is between 5 and 7 times FLC and on opening breaks the motor rated current
just to complete the set
AC2 applies to starting, plugging & inching of slip ring motors
AC4 covers starting plugging and inching of squirrel cage motors.
Hope this helps
John
AC1 is all types of ac load with a power factor not less than 0.95
AC3 applies to squirell cage motors with breaking during normal running. On starting the contactor makes the starting current which is between 5 and 7 times FLC and on opening breaks the motor rated current
just to complete the set
AC2 applies to starting, plugging & inching of slip ring motors
AC4 covers starting plugging and inching of squirrel cage motors.
Hope this helps
John
- Thread starter
- #3
- Status
Similar threads
- Question
- Locked
- Question