Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus - Shell Section Moments SM2

Status
Not open for further replies.
aliasgere

aliasgere

Civil/Environmental
Jan 14, 2012
25
I am modelling a geotechnical problem using a 3-D cylindrical shell (S4R) in ABAQUS. I get the section moment force (SM) output but I would like some advice on how I can obtain from SM2 the resultant bending moment with depth?

Your assistance will be greatly appreciated.

Kind regards,
Aliasger
 
Status
Not open for further replies.

Similar threads

ruzfactor
  • Locked
  • Question
How to get Section Point Outputs for shell elements in Abaqus 6.10 ?
Replies
3
Views
692
FEA way
FEA way
I
  • Question
Abaqus subroutine
Replies
3
Views
3K
FEA way
FEA way
I
Abaqus Subroutine
Replies
4
Views
6K
FEA way
FEA way
spyros_ar
  • Locked
  • Question
Shell-Solid interaction
Replies
4
Views
3K
FEA way
FEA way
Gov45
  • Locked
  • Question
How to request sectional forces for shell elements in ABAQUS
Replies
1
Views
431
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom