Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus Seismic analysis _ help

  • Thread starter Thread starter ana_civil
  • Start date Start date
A

ana_civil

Guest
Dear people!!!

I started working with Abaqus a short time and now I have to do a seismic
analysis.

I have to do a seismic analysis of the wall that be tested for a series of
accelerations ( amplitude / time) the analysis is nonlinear effects.
With respect to the amplitude definition, I should apply it as a base motion
of acceleration type specifying the degree of freedom (*BASE MOTION). This
option is not supported in Abaqus/CAE. Thus, I should edit the input file by
hand.

How can I input this step?, I have to do all the code by hand or just the
system dynamics.

Sorry to bother with simple questions..

Best regards,
Ana Gon
 

Part and Inventory Search

Sponsor

Back
Top