Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus reference on rigid elements/links

Status
Not open for further replies.
fsh1962

fsh1962

Mechanical
Jun 28, 2012
8
Hi all,
I need a reference on the rigid links and rigid elements in Abaqus. I need a better understanding on KINCOUP, LINK, PIN, TIE, COUP-KIN, RB3D2. All these are presented in hypermesh rigid page. Thanks.
 
Status
Not open for further replies.

Similar threads

B
  • Question
Concentrated Force on a Rigid body reference point
Replies
2
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran
I
  • Question
Abaqus subroutine
Replies
3
Views
3K
FEA way
FEA way
I
Abaqus Subroutine
Replies
4
Views
6K
FEA way
FEA way
SinaPeugeot
  • Locked
  • Question
Bending-Only Shell Elements in Abaqus/Explicit
Replies
3
Views
413
SinaPeugeot
SinaPeugeot
Smadar11
  • Locked
  • Question
ABAQUS- stractural model- fine elements in crack area
Replies
3
Views
307
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom