Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations 3DDave on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ABAQUS penetration problem

Status
Not open for further replies.
chrischeng

chrischeng

Civil/Environmental
Jul 30, 2015
1
Hi

In my input file, i have defined the contact surface property to "pressure-overclosure=hard", but the penetration still happened, the contact surface definition is right.
Are there any one can help me resolve this problem?

Thanks. the screenshot attached below.

Chris
 
 http://files.engineering.com/getfile.aspx?folder=9499fbee-c37b-498f-a711-f7e4514f4d13&file=Capture.PNG
Status
Not open for further replies.

Similar threads

G
  • Locked
  • Question
Abaqus explicit - general contact problem
Replies
5
Views
13K
FEA way
FEA way
A
Abaqus help
Replies
2
Views
7K
ArijitME
A
I
  • Question
Wear in abaqus
Replies
8
Views
11K
Rama27
R
nilesh_dot
  • Locked
  • Question
Problem during linking - Abaqus/Standard User Subroutines
Replies
2
Views
984
nilesh_dot
nilesh_dot
I
  • Question
Abaqus subroutine
Replies
3
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom