engines manyama
Mechanical
how do i find the shear center of a channel section using abaqus or solid works? Do i need the theoratical value ?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
abaqus or solidworks
- Thread starter engines manyama
- Start date
- Status
sujayan2010
Mechanical
cell is not partitioned completely. unable to do partition. sketch included. call partition required for hex. mesh
- Status
Similar threads
