Abaqus error in post buckling analysis

[Tinni1]

Hi,

I am very new to Abaqus and trying to perform post-buckling (nonlinear) analysis for a structural plate section.
I am getting an error during the non-linear analysis as below:

in keyword *CONFLICTS, file "Postbuckling.inp", line 5185: Keyword *Conflicts is generated by Abaqus/CAE to highlight changes made via the Keywords Editor that conflict with changes made subsequently via the native GUI.

It will be really helpful if someone advises, how to resolve this error.

Looking forward!

Regards,
Tinni1

 

[FEA way]

It often happens when Keyword Editor is used. Simply delete those *Conflicts keywords and it should work. But I would also check the correctness of the input file once it’s generated (just in case).

 

[Tinni1]

Hi,

Many thanks for your quick response.

I need one more suggestion from you.

How to identify the line number in the keyword section? As the error says that the conflicting word is inline 5158?

Thanks again!

 

[FEA way]

You can find this keyword in editor (most likely it will be located close to the end of the file, considering the fact that it’s a post-buckling analysis) or write the input file and open it in a text editor (in this case you will have to submit the analysis from the command line).

 

[Tinni1]

Great! Many thanks again, I will try this out.