Aba_param.inc not found problem.

[Yunus9696]

Dear colleagues
Hope you're fine.

I'm trying to link Abaqus 2019, Visual Studio 2019 and intel parallel studio 2020 to use subroutines.
while running Abaqus verification the Abaqus/Standard with user subroutines ends up with an error:

Abaqus/Standard with user subroutines
...ERROR
Abaqus did not complete successfully.
Please see std_user.log for details.
Continuing...

when I check the std_user.log file I see the problem is with missing "aba_param.inc" file:

Abaqus Error: Include file "aba_param.inc" required for compilation is not found. This may indicate a problem with the Abaqus installation.
Begin Convert MFS to SFS
7/26/2022 12:57:43 PM
Run SMASimUtility.exe
7/26/2022 12:57:43 PM
End Convert MFS to SFS
Abaqus/Analysis exited with errors


I tried reinstalling the Abaqus but the problem was not worked out.

Thanks for your support.
Best regards,
Yunus.

 

[Yunus9696]

I reply to this post for the record,

the problem is solved by installing Abaqus 2021.

Best wishes,
Yunus