The Driven Program calls for an input parameter for driving losses. I was wondering if anyone had a reference for typical values for cohesive and cohesionless soils. The program examples use 10 percent driving loss for cohesionless soils, while cohesive soils have a driving loss of 40 percent.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
AASHTO Driven Program 1.0 - Driving Losses
- Thread starter grabens
- Start date
Similar threads
- Locked
- Question
- Locked
- Question