Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AASHTO Design Response Spectrum

Status
Not open for further replies.
localaxis

localaxis

Structural
Joined
Nov 1, 2011
Messages
3
Location
US
Is there an AASHTO LRFD Bridge Provision similar to ASCE 7 12.9.4 Scaling Design Values... which limits the modal base shear to some percentage of a calculated base shear by another procedure, such as the uniform load method?

Thanks in advance.

 
Status
Not open for further replies.

Similar threads

LS_SMS
  • Locked
  • Question Question
ASCE 7-16_Extracting Enough Modes for Response Spectrum
Replies
2
Views
3K
LS_SMS
LS_SMS
engjg
  • Locked
  • Question Question
Dynamic Load Allowance (IM) | AASHTO | Minimum Vehicle Design Speed
Replies
1
Views
1K
BridgeSmith
BridgeSmith
justhumm
  • Locked
  • Question Question
AASHTO LRFD Bridge Design Software
Replies
4
Views
1K
bridgebuster
bridgebuster
B
  • Locked
  • Question Question
Vierendeel Truss - ASCE Seismic Design Response Coefficient R Value
Replies
2
Views
1K
driftLimiter
driftLimiter
SE2321
  • Locked
  • Question Question
Response Modification factor used by MBS software
Replies
2
Views
2K
DanKile
DanKile

Part and Inventory Search

Sponsor

Back
Top