Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AASHTO 25 Regulations for Bridges

Status
Not open for further replies.
briank

briank

Materials
Joined
Oct 15, 1999
Messages
1
Location
US
I would appreciate info on the design specifications required under the AASHTO 25 regulations. In particular, I desire the load and deflection requirements as a function of bridge width (span). Loading geometry would also be very helpful. Thanx.
 
Status
Not open for further replies.

Similar threads

CCBridge
  • Locked
  • Question Question
AASHTO: Concrete Pile Reinforcement Development Requirements, Section 5.12.9.1
Replies
1
Views
846
HTURKAK
HTURKAK
mgokyurek
CE Marking for Piping
Replies
0
Views
4K
mgokyurek
mgokyurek
Ahmed Elarbagi
  • Question Question
FG Pressure limit inside buildings for oil & gas facilities
Replies
0
Views
3K
Ahmed Elarbagi
Ahmed Elarbagi
G
  • Question Question
What standard is used for high-temperature pressure vessels in Europe?
Replies
4
Views
4K
GlassPowder
G
Wanna_be_SE
  • Locked
  • Question Question
AASHTO Bridge Design_Steel Beams
Replies
2
Views
434
Wanna_be_SE
Wanna_be_SE

Part and Inventory Search

Sponsor

Back
Top