I am looking for someone with expierence in testing A707 L3CL3 WITH A LOW CE=.40 AND WHAT MECHANICAL PROPERIES WERE obtained the market of pipeline flanges in south america is coming out with specs of ce=.40 MAX THIS SHOULD MAKE MECHANICALS PROPERTIES VERY POOR AND I AM TRYING TO GET SOME INSIGHT AT WHAT I MAY DISCOVER THANKS
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
A707L3CL3F65 CE=.40
- Thread starter ED1469
- Start date
The mechanical property requirements for Grade L3 can easily be met with a steel chemistry that has a CE = 0.40 max. Keeping the CE low will improve low temperature properties (fracture toughness). Talk to a vendor of these types of steels for more detailed information.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question