Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A36 specification for warpage and bow

Status
Not open for further replies.
TGLewis

TGLewis

Industrial
Joined
Jun 22, 2007
Messages
3
Location
US
I'm trying to spec a flame cut part that is 22.5 feet long and 1.5 inches thick, A36. The supplier asks me what tolerance I expect for warpage and bow of the raw material, are they not the same thing?
 
Status
Not open for further replies.

Similar threads

SAEEDGH
  • Question Question
nesting & Warehousing software for sheet metals
Replies
0
Views
7K
SAEEDGH
SAEEDGH
I
  • Question Question
OEE at 75% for dairy processing with 6 data analysts.
Replies
0
Views
6K
Industrial AI guy
I
tlwhite0311
  • Question Question
Drawings for Every Machining Operation?
Replies
12
Views
7K
mfgenggear
mfgenggear
n8cole
  • Question Question
What required specifications do fuel train manual shutoff valves (MSOV) need to have?
Replies
1
Views
7K
LittleInch
LittleInch
E
  • Locked
  • Question Question
Aluminium Extrusion Surface Problems (wire,hair,fiber, whatever you say... and burrs)
Replies
3
Views
4K
mfgenggear
mfgenggear

Part and Inventory Search

Sponsor

Back
Top