sergio1977
Industrial
Can some one tell me what is the A number for filler metal E110C-K4 or where I can find that information
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
A- number 3
- Thread starter sergio1977
- Start date
- Status
-
3
- #2
I am not going to tell you but I will help you figure it out by the following;
Use ASME B&PV Code, Section II, Part C, SFA 5.29
Go to Table 7 for K4 filler metal composition.
Once you know this go to ASME Section IX and locate the A-No in QW-442.
Use ASME B&PV Code, Section II, Part C, SFA 5.29
Go to Table 7 for K4 filler metal composition.
Once you know this go to ASME Section IX and locate the A-No in QW-442.
- Thread starter
- #3
sergio1977
Industrial
metengr, I found my answer, (A-12) Thank you.
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question
