A little help finding a plotter

[bluesman0007]

I have a chance to pick up a used plotter both HP's. One is a 755CM and the other is a 3000CP. The 755CM looks like it would suit our purpose plotting up to "D" size. The 3000CP looked bigger and may be used more for graphics but I can't find a lot of information on either. Can anyone add to what little I've been able to find so far?

Thanks,

Dennis

SolidWorks 2007 SP1.0
Windows XP Pro, Pentium4 3.00GHz
1.5 GB RAM, Matrox P650
Logitech Marble Mouse, CadMan

 

[smcadman]

We used an HP 750C at a previous job and it was a workhorse. It was fast for line drawings, but we also did some graphics on it. Never used the 755CM though. The "C" is the designation for color, but not sure what the M is for. We used it for ACAD and MDT. You might want to make sure you can still get the drivers for these because I believe the 755CM is a discontinued item.

Here is the instruction manual for the 755CM if that helps.

http://www.geo.umn.edu/computer/hp755cm.pdf

SW07 SP1.0

Flores

 

[bluesman0007]

smcadman,

Thanks for the info especially the manual. I think we'll go with this one. I checked the hp driver site and downloaded the windows XP driver I hope it works.

Dennis

SolidWorks 2007 SP1.0
Windows XP Pro, Pentium4 3.00GHz
1.5 GB RAM, Matrox P650
Logitech Marble Mouse, CadMan