Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A 3D printing guide for SolidWorks users

  • Thread starter Thread starter victor__
  • Start date Start date
V

victor__

Guest
Hey guys,

Yesterday I shared a post about 3D printing on SOLIDWORKS Tech blog, check it out here: http://blogs.solidworks.com/tech/2015/07/get-started-3d-printing-solidworks-tips-3d-hubs-2.html]SOLIDWORKS 3D printing tips from 3D Hubs

It’s full of tips for SOLIDWORKS users new to 3D printing. If you read my guide I’d love to hear your feedback here, especially if you just got started!

View attachment 6682

Happy printing!
Victor
 

Attachments

  • 3DHubs_marvin_3D_printed_materials.jpg
    3DHubs_marvin_3D_printed_materials.jpg
    79.6 KB · Views: 1
thanks for this valuable information.
 

Part and Inventory Search

Sponsor

Back
Top