V
victor__
Guest
Hey guys,
Yesterday I shared a post about 3D printing on SOLIDWORKS Tech blog, check it out here: http://blogs.solidworks.com/tech/2015/07/get-started-3d-printing-solidworks-tips-3d-hubs-2.html]SOLIDWORKS 3D printing tips from 3D Hubs
It’s full of tips for SOLIDWORKS users new to 3D printing. If you read my guide I’d love to hear your feedback here, especially if you just got started!
View attachment 6682
Happy printing!
Victor
Yesterday I shared a post about 3D printing on SOLIDWORKS Tech blog, check it out here: http://blogs.solidworks.com/tech/2015/07/get-started-3d-printing-solidworks-tips-3d-hubs-2.html]SOLIDWORKS 3D printing tips from 3D Hubs
It’s full of tips for SOLIDWORKS users new to 3D printing. If you read my guide I’d love to hear your feedback here, especially if you just got started!
View attachment 6682
Happy printing!
Victor
