I am looking to do some testing on 9-5/8 L80 13% cr Casing. I only need about 4 feet. I was looking for 43.5 ppf but anything heavy would be fine too. Actually if I can not get 13 % cr I would take 9-5/8 L80 with any Chrome percentage. I have been getting replies that chrome casing is no longer available. Is this true? Please Help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
9-5/8 Chrome Casing
- Thread starter Hammer07
- Start date
This is typical oilfield casing stuff, I would be looking into Western Canadian markets for this stuff. Try Specialty Steel or Wilkinson Steel out of the Vancouver area.
Kenneth J Hueston, PEng
Principal
Sturni-Hueston Engineering Inc
Edmonton, Alberta Canada
Kenneth J Hueston, PEng
Principal
Sturni-Hueston Engineering Inc
Edmonton, Alberta Canada
- Thread starter
- #3
- Status
Similar threads
- Question
- Question
- Locked
- Question