Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

7.5 Drawing View Display not updating correctly

Status
Not open for further replies.

Dplance3

Mechanical
Joined
Feb 9, 2011
Messages
3
Location
US
I've recently moved to NX 7.5 from 6 and have had no display problems. My new 64-bit machine has a Qundro pro video card. Here's the problem I'm now having. While in a drawing and trying to do View Dependent Edit or dimensioning the views outside where I've zoomed into do not display correctly when I move or unzoom my view. I can move around and zoom in and out with ease and the display is great. But when I do any sort of work in a view I get that display problem. What do I need to set to get it to display correctly all of the time?
 
Can you provide some images of what it is that you're seeing?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
 
yes, though I can't show the whole drawing. -01 shows what it looks like when I update the views. -02 is right after I've zoomed up on the right hand view and did a view dependent edit and zoomed back out.
 
 http://files.engineering.com/getfile.aspx?folder=02e64865-a2d1-49c7-9c2f-e6843b62a209&file=screen_shot_02.jpg
You only uploaded the -02 image. If you're trying up upload more then one file, zip them first.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
 
It sounds a lot like a bug that was fixed in NX7.5.2 where the display doesn't update correctly after zooming in or panning in drafting.

You'll probably find that your on NX7.5.0.32 (Help _> About NX -> System Information). If you are, download the NX7.5.2 or higher Maintenance Release from Siemens.

Anthony Galante
Technical Resource Coordinator

NX4.0.4MP10, NX5.0.6, NX6.0.5, NX7.0.1, NX7.5.0-> NX7.5.5 & NX8.0.0 -> NX8.0.1
 
Have you forced a full display update of the drawing views?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top