Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

661PRO Software

Status
Not open for further replies.
Golfingod

Golfingod

Mechanical
Joined
Mar 24, 2021
Messages
1
Location
US
We are evaluating a calculation from a 3rd party done with 661PRO Software. Can someone tell us what the software uses for Flange ID?
The calculation used 8.496" for a 6”-150# nozzle.
 
Status
Not open for further replies.

Similar threads

Whin
  • Question Question
Boiler Inspection Software
Replies
1
Views
7K
Dhurjati Sen
Dhurjati Sen
IHQ22
  • Locked
  • Question Question
Software to track boiler watertube repairs, replacements, inspections, etc
Replies
1
Views
2K
Dhurjati Sen
Dhurjati Sen
Ronak_Patel
  • Locked
  • Question Question
commercial software for design of pressure vessel and heat exchanger according to ASME SEC ||| for nuclear application.
Replies
1
Views
5K
MJCronin
MJCronin
Cheesestrip
  • Locked
  • Question Question
EN13445 Vessel and custom saddle design software advice
Replies
0
Views
352
Cheesestrip
Cheesestrip
Umar107
  • Locked
  • Question Question
Software suggestions for Pressure Vessel Design
Replies
6
Views
1K
Umar107
Umar107

Part and Inventory Search

Sponsor

Back
Top