some reason this is not in the body of the code::::::
A.1.1 Generally accepted NFPA installation practices for water-based fire protection systems relevant to this standard are found in the following:
NFPA 13, Standard for the Installation of Sprinkler Systems.
NFPA 13R, Standard for the Installation of Sprinkler Systems in Residential Occupancies up to and Including Four Stories in Height.
NFPA 14, Standard for the Installation of Standpipe and Hose Systems.
NFPA 15, Standard for Water Spray Fixed Systems for Fire Protection.
NFPA 16, Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems.
NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection.
NFPA 22, Standard for Water Tanks for Private Fire Protection.
NFPA 24, Standard for the Installation of Private Fire Service Mains and Their Appurtenances.
NFPA 750, Standard on Water Mist Fire Protection Systems.
mainly this statement:::::
"""""""For systems originally installed in accordance with one of these standards, the repair, replacement, alteration, or extension of such systems should also be performed in accordance with that same standard. When original installations are based on other applicable codes or standards, repair, replacement, alteration, or extension practices should be conducted in accordance with those other applicable codes or standards."""""
or is this section trying to say that::::::
5.5.3 Where the original installation standard is different from the cited standard, the use of the appropriate installing standard shall be permitted.