Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

4m Diameter GRP Pipe

Status
Not open for further replies.

echelon101

Civil/Environmental
Joined
Jul 22, 2008
Messages
4
Location
GB
I have a 4000mm diameter grass reinforced plastic pipe system in Middle East that needs checking for seismic capacity, in terms of maximum span. There are a lot of Nuclear Engineering research papers on seismic capacity of steel pipes in Japan but none it seems on GRP piping.

Upon consulting ASME 31.1 Table 121.5 the diameters only go up to 24 inches. Owing to the fact that the Middle East is not that seismically active compared to say Japan I am assuming that the peak ground acceleration, PGA, is going to be 0.2g - 0.3g.

I have also checked the US Piping Manual to no avail as it does not discuss PGA.

I was wondering if anyone has an ideas.
 
Grass reinforced plastic pipe?

I'm sure you meant glass instead of grass.

You might check with the manufacturer and see if they have any of the information that you need.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top