Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
440C SS stress-strain curve 2
- Thread starter JTbearing
- Start date
-
2
- #2
EdStainless
Materials
It will be a straight line from start to UTS, the slope will be about 30,000,000 psi.
This material has no significant yielding prior to failure.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
This material has no significant yielding prior to failure.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
- Status
Similar threads
- Locked
- Question
- Locked
- Question