Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
410 Creep properties 1
- Thread starter Isha90
- Start date
-
1
- #2
EdStainless
Materials
Considering that CA15 is a low carbon grade I would expect F22 to have superior creep resistance.
The are higher carbon cast stainless grades (martensitic, not ferritic) that would have better creep properties if you are looking for castings.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
The are higher carbon cast stainless grades (martensitic, not ferritic) that would have better creep properties if you are looking for castings.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
- Status